Fax Automatic Reception; Reception Method - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Basic) > FAX Automatic Reception

FAX Automatic Reception

When using this machine as a FAX-dedicated machine that does not receive telephone calls, set the machine to FAX-
dedicated reception. No special operation is required when receiving faxes.
NOTE
When you are receiving DRD service from a telephone company, change the reception method to [Auto (DRD)]. For
details, refer to DRD Reception on page

Reception Method

This machine allows the following five reception methods.
• Auto (Normal)
• Auto (FAX/TEL) (Refer to 6-9.)
• Auto (TAD) (Refer to 6-11.)
• Auto (DRD) (Refer to 6-24.)
• Manual (Refer to 4-15.)
Checking and Changing the Reception Method
Reception Starts
6-24.
1
Press the [System Menu] key.
2
Press [FAX], [Next] of Reception, [Next] of FAX, and then [Change] of RX Setting.
3
Select [Auto (Normal)].
4
Press [OK].
1
When a fax comes in, the [Processing] indicator blinks and reception automatically
begins.
NOTE
When a telephone (commercially available) is connected to the machine, reception
starts after the telephone rings.
You can change the number of times the ringing tone rings. (Refer to
page 6-13.)
To cancel the reception, refer to
Communication) on page
Cancelling Transmission (Disconnection of
3-17.
3-14
Rings on