Kyocera TASKalfa 3051ci Operation Manual page 79

FAX Operation (Advanced) > Chain Dial
Use the numeric keys to enter a fax number
Enter the fax number using the numeric keys.
If Entry Check for New Destination is Off, press [OK] to complete entering the
number.
If Entry Check for New Destination is On, press [OK] and you are prompted to
confirm the FAX number is correct. Re-enter the same FAX number and press [OK]
to complete the entry.
When [New Destination Entry] is set to [Prohibit], the numeric keys cannot be used
to enter a fax number. For details, refer to
For details, refer to the machine's Operation Guide. (8 Setup and Registration
(System menu) > Send > Entry Check for New Dest.)
To continue entering a new number, press [FAX No. Entry] and repeat the above
procedure.
To correct the FAX number, press [Edit], and then re-enter the chain number.
Select fax number from the Address Book
1 Press [Address Book].
2 Select the destination from the list.
You can select several destinations.
3 Press [OK].
The chain number '010' is automatically added to all the destinations.
Select fax number from One-touch key
Select the destination from One-touch keys. The chain number '010' is automatically
added to the destinations.
To enter another fax number with a one-touch key, re-enter the chain number.
6
Press the [Start] key. Transmission begins.
NOTE
When On is selected in Destination Check before Send, a destination confirmation
screen is displayed when you press the [Start] key. For details, refer to
Confirmation Screen of Destinations on page
Send and Forward on page
5-12.
4-13
4-55.