Canceling Communication; Cancelling Memory Transmission (While Originals Are Being Scanned); Cancelling Memory Transmission (During Communication); Cancelling And Sending Delayed Transmissions (Queued) - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Basic) > Canceling Communication

Canceling Communication

The method for cancelling communication with this machine differs depending on the transmission method (memory
transmission or direct transmission) and communication form. Methods of cancelling in various cases are explained
here.
Cancelling Memory Transmission
(while originals are being scanned)
During memory transmission, to cancel scanning while originals are being scanned, press the [Stop] key on the
operation panel, or press [Cancel] on the touch panel. Scanning of originals is canceled, and the originals are ejected.
When originals remain in the document processor, take them out from the original output table.

Cancelling Memory Transmission (during communication)

During memory transmission, to cancel communication after it has started following the completed scanning of originals,
use the following procedure.
NOTE
You can cancel transmission by disconnecting the telephone line. For details, refer to
(Disconnection of Communication) on page
Even if transmission is canceled, there is a possibility that pages scanned prior to cancelation were sent to the
receiving party. Check with the receiving party to see if pages were accidentally sent.

Cancelling and Sending Delayed Transmissions (Queued)

To cancel delayed transmissions that are queued, or to send delayed transmissions immediately rather than waiting for
the specified time, use the procedure below.
3-17.
1
Press the [Status/Job
2
Press [Sending Jobs].
3
Select the job you want to cancel, and press [Cancel].
When the cancel confirmation screen appears, press [Yes].
Communication is canceled.
Status
Status
Job Type All
Job No. Accepted Time Type Destination
438 14:47 0123456789
Cancel Priority
Override
Printing Jobs Sending Jobs Storing Jobs
Status
1
Press the [Status/Job
2
Press [Sending Jobs], and then [Scheduled Job].
Cancel] key.
Scheduled Job Log
User Name Status
InProcess
Detail
Device/
Paper/
Close
Communicate
Supplies
02/02/2013 10:10
Cancel] key.
3-16
Cancelling Transmission
1/1