Machine - Kyocera TASKalfa 3051ci Operation Manual

Part Names and Functions > Machine

Machine

This chapter explains the names of parts when the machine is used as a fax machine.
For the parts required when functions other than FAX are used, refer to the machine's Operation Guide.
5
4
6
* The machine may differ from the above illustration depending on the type of your machine.
1 Operation panel
2 Main power switch
3 MP (Multi Purpose) tray
4 LINE connector (L1)
5 LINE connector (L2)
6 TEL connector (T1)
IMPORTANT
You cannot receive a fax when the main power switch is turned off. To receive faxes with the power turned off, press
the Power key on the operation panel.
1
Perform the fax operation with this panel.
Set this switch to the ON (|) side when performing the fax or
copier operation. The touch panel lights to enable operation.
Set the paper in this tray when using a type of paper other
than the cassette (e.g., when using special paper).
Connect the modular cord for the telephone line to this
connector. This connector is Port 1.
If you install 2 optional FAX Kits (Dual FAX option), you can
use Port 2. Connect the modular cord for the telephone line to
this connector.
When using a commercially available telephone set, connect
the modular cord to this connector.
1-3
2
3