Selection Of Telephone Line (Inch Version Only) - Kyocera TASKalfa 3051ci Operation Manual

Setup and Registration > Selection of Telephone Line (Inch version only)

Selection of Telephone Line (Inch version only)

Select the telephone line according to the type you are contracted with. Please note that selecting a wrong telephone
line will prevent you from sending fax.
NOTE
If you install 2 optional FAX Kits (Dual FAX option) and then use 2 phone lines, select the option for each line.
1
Press the [System Menu] key.
2
Press [FAX], [Next] of Transmission, [Next] of FAX, and then [Change] of Dialing
Mode (Port 1) or Dialing Mode (Port 2).
FAX - FAX Port 1
Set FAX port.
Tone(DTMF)
Status
3
According to the type of telephone line you are contracted with, press [Tone (DTMF)]
or [Pulse (10PPS)].
4
Press [OK].
Pulse(10PPS)
Cancel OK
02/02/2013 10:10
6-2