Kyocera TASKalfa 3051ci Operation Manual page 105

FAX Operation (Advanced) > Sub Address Communication
NOTE
When a sub address has been registered to the destination of the Address Book,
you can use the destination. When a sub address-registered destination in the
Address Book is used for a One-touch key, you can also use the One-touch key. In
this case, go to step 9.
4
Use the numeric keys to enter the fax number of the other party.
If Entry Check for New Destination is Off, press [OK] to complete entering the
number.
If Entry Check for New Destination is On, press [OK] and you are prompted to
confirm the FAX number is correct. Re-enter the same FAX number and press [OK]
to complete the entry.
For details, refer to the machine's Operation Guide. (8 Setup and Registration (System menu) >
Send > Entry Check for New Dest.)
To continue entering a new number, press [FAX No. Entry] and repeat the above procedure.
To correct the FAX number, press [Edit].
5
Press [Detail].
6
Press [Change] of Sub Address.
FAX No. Entry - Sub Address
Sub Address
1234567890
Password
Set sub address.
Enter sub address and password
using numeric keys. (Max. 20 digits)
Status
7
Press [Sub Address] and enter the sub address using the numeric keys.
NOTE
You can use up to 20 digits including the numbers from 0 to 9, ' (space)', '#' and '*'
characters to enter a sub address.
8
Press [Password] and enter the sub address password using the numeric keys.
NOTE
You can use up to 20 digits including the numbers from 0 to 9, ' (space)', '#' and '*'
characters to enter a sub address password. When the machine receives originals,
a sub address password is not used.
9
Press [OK].
10Press [OK].
11Press the [Start] key. Transmission begins.
Space Backspace
Cancel OK
02/02/2013 10:10
4-39