Registering Permit Fax No - Kyocera TASKalfa 3051ci Operation Manual

Setup and Registration > Transmission Restriction
Reception Rejection •
•
† If there are no Reject FAX numbers registered, calls are only rejected from senders whose Local FAX Numbers (Indicates
local FAX information entries, not the actual line numbers.) are not registered.

Registering Permit FAX No.

NOTE
Up to 50 Permit FAX numbers can be registered.
Prerequisites
Register Reject FAX numbers.
(Refer to Registering Reject FAX No. on
page 6-30.)
Reception restriction settings are specified
in [Reject List] in Reception Restrictions.
(Refer to Setting Reception Restriction on
page 6-34.)
1
Press the [System
2
Press [FAX], [Next] of TX/RX Restriction and then [Add/Edit] of Permit No. List.
3
Press [Add].
FAX - Permit No. List
Add a number from which faxes will be accepted.
(Up to 50 numbers can be added.)
0120999333
Status
4
Use the numeric keys to enter Permit FAX No.
Up to 20 digits can be entered.
FAX - Permit No.
Add or edit permit number.
Use the numeric keys to enter a number.
123456789
Pause
Status
†
•
•
Menu] key.
TEL Number
1/1
Detail Delete
Space
Backspace
Cancel
6-27
Reception Rejection Requirements
The sender's Local FAX Number is not
registered.
The sender's Local Fax Number matches a
Reject FAX No. registered on the machine.
Add
Close
02/02/2013 10:10
OK
02/02/2013 10:10