Direct Transmission - Kyocera TASKalfa 3051ci Operation Manual

FAX Operation (Basic) > Automatic Send
NOTE
When continuous scan is set, you can continue with scanning of a next original after an original on the glass
surface has been stored in memory. Every time one page is scanned, you perform an operation to allow
continued scanning, and after all the originals have been stored in memory, the receiving system is dialed.

Direct Transmission

Dials the receiving system, and after the communication has started, originals are scanned. In direct transmission, you
can designate only one destination for one transmission. You cannot use direct transmission when the optional Printed
Document Guard Kit is installed.
Direct Transmission (When originals are placed in the document processor):
After the telephone line has connected with the receiving system, scanning of the originals placed in the document
processor starts. When multiple-page originals are placed, each page is scanned after the previous one is sent.
Direct Transmission (When originals are placed on the glass surface):
This method is suitable for sending book originals that cannot be placed in the document processor. After the telephone
line has connected with the receiving system, the originals placed on the glass surface are scanned and sent.
NOTE
When continuous scan is set, you can continue with scanning of a next original after an original on the glass surface
has been sent. Every time one page is scanned, you perform an operation to allow continued scanning.
To select direct transmission, use the following procedure.
1
Press [Advanced Setup], and then [FAX Direct Transmission].
Sending Image
Zoom
Continuous
Scan
Original : A4
FAX
Zoom : 100%
Polling RX
Send : A4
Preview
Preview
Destination Quick Setup Org./Sending
Data Format
Status
2
Press [On].
Destination
Centering Border Erase FAX Delayed
Transmission
Job Finish File Name FAX Direct
Notice Entry Transmission
Send and Send and
Print Store
Image Quality Advanced Program
Setup
02/02/2013 10:10
3-5