Changing Media Server Id And Password; Hmcp Configuration Tool - Altigen MaxACD Administrator Manual

Chapter 5: Media Server Management
1. Select the media server you want to detach.
2. Click the Detach button. You are asked for confirmation.
3. Click Yes to confirm. A message appears telling you that the detachment was
successful, and the Status field of the media server reads Disconnected.
To delete a media server from the Softswitch Component Configuration
window:
First detach the media server. Then select the media server you want to delete, and click
the Delete button. The media server disappears from the window. You can add it back
again, if you want, by using the Add button.

Changing Media Server ID and Password

You can change the selected media server's unique number (01, 02) and the password
by clicking the Config button in the Softswitch Component Configuration window. This
opens the Gateway Configuration Tool. Make your changes, and click Apply.

HMCP Configuration Tool

The configuration tool that opens when you click the Config button in the Softswitch
Component Configuration window can also be opened from the Start > All Programs
> MaxACD > HMPC Tools > HMPC Configuration. When you open it from the Start
menu, you'll see this dialog box:
Figure 5-3. HMCP Configuration Tool log-in dialog box
Enter the IP address and password of the media server you want to check on, and click
OK.
The HMCP Configuration Tool looks like this:
56
MaxACD Administrator Manual