Assigning Seat-Based Client Licenses; Stopping The Maxacd Switching Service - Altigen MaxACD Administrator Manual

Setting the Refresh Interval
The Current Resource Statistics window is updated according to the Refresh
Interval configuration. By default, the Refresh Interval is set to refresh the data in
the window every 5 seconds. To change the refresh interval, click the Refresh Interval
button at the top of the window, and set the refresh interval to a number of seconds up
to one minute. Setting the time to 0 is turning off the refresh interval.

Assigning Seat-Based Client Licenses

MaxACD for Lync client products require seat-based licenses. If an extension is not
assigned to a product, that extension won't be able to use the client product.
Assign extensions to seat-based licenses in the Client SEAT License Management
configuration screen (License > Client SEAT License Management).
Figure 3-10. Client SEAT License Management dialog box
Select a license type and then select extensions to add to the list of "members" who can
use the selected product. Make multiple selections by using Shift+click and Ctrl+click.
The screen shows the total number of licenses you have for a client product and the
number of licenses assigned.

Stopping the MaxACD Switching Service

Normally, when you exit MaxACD Administrator, the MaxACD services remain active. If
you need to shut down the system, from MaxACD Administrator, select Services > Shut
Down All Services.
This stops the MaxACD system services, including the MaxACD Administrator application
itself. When you re-open MaxACD Administrator, the switching services are reactivated.
You can stop MaxACD services only when you are logged in at the MaxACD system
computer.
Assigning Seat-Based Client Licenses
MaxACD Administrator Manual 29