Configuring Redundancy
Figure 20-6. SIPSD and SIP Trunk dialog boxes
7. Log into MaxACD on the secondary server and replicate all of the settings from the
primary server. Open MaxAdministrator and choose Extension Configuration.
8. On the General tab, choose the number and click the Apply To button.
Step 5: Reboot Servers and Restart Services
You must reboot the servers and restart the service before you proceed. You can use the
AltiGen Start & Stop all MaxACD Services tool for this; see "Start & Stop All MaxACD
Services" on page 230.
1. Shut down all services of the secondary server.
2. Shut down all services of the primary server.
3. Restart all services of the primary server.
4. Restart all services of the secondary server.
MaxACD Administrator Manual 205