Installing Vrmanager For A Client; Setting Access Privileges - Altigen VRManager Manual

Installing VRManager for a Client

Installing VRManager for a Client
To install VRManager for a client system:
1. Run the Setup program and follow the installation instructions as they
appear on the screen.
2. In the Custom Setup screen, choose to install Voice Record Manager
Client or Voice Record Manager Admin.
If you install VR Admin on a client system, some Browse buttons
will not appear.
After installation, you can run VRManager Client from Start > Programs
> VRManager > VRM Admin or VRM Client.
Note: If VRManager is run behind a firewall, open TCP port 10040.
(VRManager may not work behind NAT.)

Setting Access Privileges

• The directory of centralized records in the MaxACD server must be
shared fully with the VRManager user. This user not only requires
privilege to read/write to the shared folder, but also read/write to the
local folder.
• The destination of the backup location must be valid and accessible in
the local computer or remote computer. The user must have full
privilege to read/write to the shared and local folders.
• In Windows 2003 Server, the default setting of the OS security is very
robust, so caution should be used when setting users' access privileges.
4 VRManager Manual