Sip Configuration Parameters - 3Com VCX V7122 User Manual

ini File Field Name
*
Web Parameter Name
SNMP Community String Parameters
SNMPReadOnlyCommunityString_x
SNMPReadWriteCommunityString_x
SNMPTrapCommunityString_x
SetCommunityString
Note: Obsolete parameter, use
SNMPReadWriteCommunityString_x
instead.
SNMPManagerIP
Note: Obsolete parameter, use
SNMPManagerTableIP_x instead.

SIP Configuration Parameters

In Table 26, parameters in brackets are the format in the Embedded Web Server
102
Valid Range and Description
Read-only community string (up to 19 chars).
The default string is "public".
Read-write community string (up to 19 chars).
The default string is "private".
Community string used in traps (up to 19 chars).
The default string is "trapuser".
SNMP community string (up to 19 chars).
Default community string for read "public", for set & get "private".
IP address (in dotted format notation) for the computer that is used as the first
SNMP Manager. The SNMP Manager is a device that is used for receiving
SNMP Traps.
Note 1: To enable the device to send SNMP Traps, set the ini file parameter
SNMPManagerIsUsed to 1.
Note 2: If you want to use more than one SNMP manger, ignore this parameter
and use the parameters 'SNMPManagerTableIP_x' instead.
3Com VCX V7122 SIP VoIP Gateway User Manual
*
.