3Com VCX V7122 User Manual page 94

Voip sip gateway
Hide thumbs Also See for VCX V7122:
Table of Contents

Advertisement

Table 24
Basic, Logging, Web and RADIUS Parameters
ini File Field Name
*
Web Parameter Name
EthernetPhyConfiguration
DHCPEnable
[Enable DHCP]
EnableDiagnostics
EnableLanWatchDog
[Enable LAN Watchdog]
DNSPriServerIP
[DNS Primary Server IP]
DNSSecServerIP
[DNS Secondary
Server IP]
94
Valid Range and Description
0 = 10 Base-T half-duplex
1 = 10 Base-T full-duplex
2 = 100 Base-TX half-duplex
3 = 100 Base-TX full-duplex
4 = auto-negotiate (Default)
Auto-negotiate falls back to half-duplex mode (HD) when the opposite port is
not in auto-negotiate, but the speed (10 Base-T, 100 Base -TX) in this mode
is always configured correctly.
0 = Disable DHCP support on the gateway (default).
1 = Enable DHCP support on the gateway.
After the gateway is powered up, it attempts to communicate with a BootP
server. If a BootP server is not responding and if DHCP is enabled, then the
gateway attempts to get its IP address and other network parameters from
the DHCP server.
Web Note: After you enable the DHCP Server (from the Web browser) follow
this procedure:
Click the Submit button.
Save the configuration using the 'Save Configuration' button (before you
reset the gateway). For information on how to save the configuration see
Save Configuration
on page 88.
Reset the gateway directly. (Web reset doesn't trigger the BootP/DHCP
procedure and the parameter DHCPEnable reverts to '0').
Note that throughout the DHCP procedure the BootP/TFTP application must
be deactivated. Otherwise, the gateway receives a response from the BootP
server instead of the DHCP server.
Note: The DHCPEnable is a special "Hidden" parameter. Once defined and
saved in flash memory, its assigned value doesn't revert to its default even if
the parameter doesn't appear in the ini file.
0 = No diagnostics (default)
1 = Perform diagnostics
0 = Disable LAN Watch-Dog (default).
1 = Enable LAN Watch-Dog.
If LAN Watch-Dog is enabled, the gateway restarts when a network failure is
detected.
IP address of the primary DNS server in dotted format notation.
IP address of the secondary DNS server in dotted format notation.
3Com VCX V7122 SIP VoIP Gateway User Manual

Advertisement

Table of Contents
loading

Table of Contents