Log Window - 3Com VCX V7122 User Manual

•
Filter Clients: Click this button to prevent the BootP Tool from logging BootP
requests received from disabled clients or from clients which do not have entries
in the Clients table.
•
Reset: Click this button to open a new window where you enter an IP address
requests for a gateway that you want to reset. See
Figure 66 Reset Screen
When a gateway resets, it first sends a BootRequest. Therefore, Reset can be used to force
a BootP session with a gateway without needing to power cycle the gateway. As with any
BootP session, the computer running the BootP Tool must be located on the same subnet as
the controlled VoIP gateway.

Log Window

The log window (see Figure 65
reply transactions, as well as TFTP transactions. For each transaction, the log window
displays the following information:
Client: shows the Client address of the VoIP gateway, which is the MAC address of the
client for BootP transactions or the IP address of the client for TFTP transactions.
Date: shows the date of the transaction, based on the internal calendar of the computer.
Time: shows the time of day of the transaction, based on the internal clock of the
computer.
Status: indicates the status of the transaction.
Client Not Found: A BootRequest was received but there is no matching client entry
in the BootP Tool.
Client Found: A BootRequest was received and there is a matching client entry in the
BootP Tool. A BootReply is sent.
Client's MAC Changed: There is a client entered for this IP address but with a
different MAC address.
Client Disabled: A BootRequest was received and there is a matching client entry in
the BootP tool but this entry is disabled.
Listed At: Another BootP utility is listed as supporting a particular client when the
Test Selected Client button is clicked (for details on Testing a client see
Client on page 201).
Download Status: Progress of a TFTP load to a client, shown in %.
New IP / File: shows the IP address applied to the client as a result of the BootP
transaction, as well as the file name and path of a file transfer for a TFTP transaction.
Client Name: shows the client name, as configured for that client in the Client
Configuration screen.
196
on the previous page) records all BootP request and BootP
3Com VCX V7122 SIP VoIP Gateway User Manual
Figure 66 below.
Testing the