3Com VCX V7122 User Manual page 66

Figure 29 Network Settings Screen
Note that the default RTP Base UDP Port is 6000.
Configuring the SNMP Managers Table
The SNMP Managers table allows you to configure the attributes of up to five SNMP
managers.
To configure the SNMP Managers Table, follow these steps:
1
Access the 'Network Settings' screen (Advanced Configuration menu > Network
Settings); the 'Network Settings' screen is displayed (see
2 Open the SNMP Managers Table screen by clicking the arrow sign (-->) to the right of
the SNMP Managers Table label; the SNMP Managers Table screen is displayed (see
Figure 30 on page 67).
3 Configure the SNMP managers parameters.
4
Click the Submit button to save your changes.
5 Click the Close Window button.
6
To save the changes so they are available after a power fail see
page 88.
66
Figure
3Com VCX V7122 SIP VoIP Gateway User Manual
29).
Save Configuration on