Using Auto Discover For Initial System Configuration - 3Com 3C10122 - NBX Business Telephone Installation Manual

Using
Auto Discover for
Initial System
Configuration
Table 24 Auto Discover Actions on NBX System Components
Component
NBX Analog Line Card and
NCP analog line ports
NBX Digital Line Card
Table 23 NBX NetSet Regional Software Tab – Status Values
Status Description
Error while Loading One or more of the files associated with a component are
missing. This situation should never occur.
Using the Auto Discover feature simplifies initial system configuration by
adding information about new devices to the configuration database.
"Devices" include telephones, Analog Line Card ports, Digital Line Card
channels, Analog Terminal Adapter ports, 3Com Attendant Consoles, and
"virtual devices" such as the pcXset Soft Telephone.
CAUTION: 3C10165D E1 Digital Line Cards and 3C10116D T1 Digital
Line Cards can have their flash memory corrupted if you remove power
from the cards or remove the cards from the NBX chassis while they are
receiving their download after a system upgrade.
Before you use the Auto Discover process to configure telephones and
attendant consoles, you should review the procedures in
Attendant Consoles"
After a device has been discovered, the Auto Discover process does not
find that device again. To remove a device from the system database, you
must use the NBX NetSet utility to manually remove the device and its
database record. Deleting a user does not delete the device associated
with that user.
Licensed devices will not be discovered until after you have entered the
appropriate Group License to the system. For more information on Group
Licensing, see "Device Licenses Details"
Table 24 summarizes Auto Discover actions for NBX system components.
Auto Discover Action
Gathers configuration information from each port on the card, assigns a default
extension, and enters the information into the configuration database.
Gathers configuration information from the card, assigns a default extension, and
enters the information into the configuration database.
After you Auto Discover the Digital Line Card, you may need to edit the Dial Plan to
configure Direct Inward Dial (DID) numbers.

Using Auto Discover for Initial System Configuration

in Chapter 3.
on
"Telephones and
page 75.
111