3Com VCX V7122 User Manual page 60

To configure the Tel Profile settings, follow these steps:
1 Open the 'Tel Profile Settings' screen (Protocol Management menu > Profile
Definitions submenu > Tel Profile Settings option); the 'Tel Profile Settings' screen is
displayed.
Figure 25 Tel Profile Settings Screen
2
In the 'Profile ID' drop-down list, select the Tel Profile you want to edit (up to four Tel
Profiles can be configured).
3
In the 'Profile Preference' drop-down list, select the preference (1-10) of the current
Profile. The preference option is used to determine the priority of the Profile. If both IP
and Tel profiles apply to the same call, the coders and other common parameters of the
preferred Profile are applied to that call. If the Preference of the Tel and IP Profiles is
identical, the Tel Profile parameters are applied.
Note: If the coder lists of both IP and Tel Profiles apply to the same call, an intersection
of the coders is performed (i.e., only common coders remain). The order of the coders is
determined by the preference.
4 Configure the Profile's parameters according to your requirements. For detailed
information on each parameter, see the description of the screen in which it is configured
as an individual parameter.
5 In the 'Coder Group' drop-down list, select the coder group you want to assign to that
Profile. You can select the gateway's default coders (see
the coder groups you defined in the Coder Group Settings screen (see
Settings on page 59).
6 Repeat steps 2 to 6 for the second to fifth Tel Profiles (optional).
60
Coders
3Com VCX V7122 SIP VoIP Gateway User Manual
on page 46) or one of
Coder Group