Creating A Loadable Voice Prompts File - 3Com VCX V7122 User Manual

Figure 75 Call Progress Tones Conversion Screen
3
Click the Select File... button that is in the 'Call Progress Tone File' box.
4 Navigate to the folder that contains the CPT ini file you want to convert.
5
Click the ini file and click the Open button; the name and path of both the ini file and the
(output) dat file appears in the fields below the Select File button.
6
Enter the Vendor Name, Version Number and Version Description in the corresponding
required fields under the 'User Data' section.
7 Set 'CPT Version' to 'Version 1' only if you use this utility with a version released before
version 4.4 of the device software (this field is used to maintain backward compatibility).
8
Check the 'Use dBm units for Tone Levels' check box. Note that the levels of the Call
Progress Tones (in the CPT file) must be in -dBm units.
9
Click the Make File button; you're prompted that the operation (conversion) was
successful.
10 Close the application.

Creating a Loadable Voice Prompts File

For detailed information on the Voice Prompts file see
page 141.
To create a loadable Voice Prompts dat file from your voice recording files, follow these
steps:
1
Execute the TrunkPack Downloadable Conversion Utility, DConvert240.exe (supplied
with the software package); the utility's main screen opens (see
2
Click the Process Voice Prompts File(s) button; the Voice Prompts screen, shown in
Figure 76, opens.
3Com VCX V7122 SIP VoIP Gateway User Manual
Prerecorded Tones (PRT) File
Figure 74
on
on page 220).
221