3Com VCX V7122 User Manual page 84

Click Next; the 'Load an ini File' screen opens; see
any other auxiliary file listed in the Wizard is optional.
Note that as you progress, the file type list on the left indicates which file type loading is in
process by illuminating green (until 'FINISH').
Figure 47
Load an ini File Screen
6
In the 'Load an ini File' screen, you can now choose to either:
Click Browse and navigate to the ini file; the check box 'Use existing configuration', by
default checked, becomes unchecked. Click Send File; the ini file is loaded to the VCX
V7122 and you're notified as to a successful loading.
Ignore the Browse button (its field remains undefined and the check box 'Use existing
configuration' remains checked by default).
Ignore the Browse button and uncheck the 'Use existing configuration' check box; no ini
file is loaded, the VCX V7122 uses its factory-preconfigured values.
You can now choose to either:
Click Cancel; the VCX V7122 resets utilizing the cmp, ini and all other configuration files
that were previously stored in flash memory. Note that these are NOT the files you
loaded in the previous Wizard steps.
Click Reset; the VCX V7122 resets, utilizing the new cmp and ini file you loaded up to
now as well as utilizing the other configuration files.
Click Back; the 'Load a cmp file' screen is reverted to; see
Click Next; the 'Load a CPT File' screen opens, see
or any other auxiliary file listed in the Wizard is optional.
84
Figure 47. Loading a new ini file or
Figure 45
Figure 48; Loading a new CPT file
3Com VCX V7122 SIP VoIP Gateway User Manual
on page 83.