Activating The Internal Syslog Viewer - 3Com VCX V7122 User Manual

Figure 41 Channel Status Details Screen

Activating the Internal Syslog Viewer

The Message Log screen displays Syslog debug messages sent by the gateway.
Note that it is not recommended to keep a 'Message Log' session open for a prolonged
period (see the Note below). For prolonged debugging use an external Syslog server, see
Syslog Support on page 163.
See the Debug Level parameter 'GwDebugLevel' (described in
determine the Syslog logging level.
To activate the Message Log, follow these steps:
1
In the General Parameters screen under Advanced Parameters submenu (accessed
from the Protocol Management menu), set the parameter 'Debug Level' to 5. This
parameter determines the Syslog logging level, in the range 0 to 5, where 5 is the
highest level.
2
Open the 'Message Log' screen (Status & Diagnostics menu > Message Log); the
'Message Log' screen is displayed.
3Com VCX V7122 SIP VoIP Gateway User Manual
Table 24 on page 94) to
79