3Com VCX V7122 User Manual page 50

Voip sip gateway
Hide thumbs Also See for VCX V7122:
Table of Contents

Advertisement

Table 15
Number Manipulation Parameters
Parameter
TON
Presentation
Dialing Plan Notation
The dialing plan notation applies, in addition to the four Manipulation tables, also to Tel IP
Routing table and to IP Trunk Group Routing table.
When entering a number in the 'Prefix' column, you can create an entry that represents
multiple numbers using the following notation:
[n-m] represents a range of numbers
[n,m] represents multiple numbers. Note that this notation only supports single digit
numbers.
x represents any single digit
# represents the end of a number
For example:
[5551200-5551300]# represents all numbers from 5551200 to 5551300
[2,3,4] represents all numbers that start with the numbers 2, 3 and 4
54324 represents any number that starts with 54324
54324xx# represents a 7 digit number that starts with 54324
123[100-200]# represents all numbers from 123100 to 123200.
The VoIP gateway matches the rules starting at the top of the table. For this reason, enter
more specific rules above more generic rules. For example, if you enter 551 in entry 1 and
55 in entry 2, the VoIP gateway applies rule 1 to numbers that starts with 551 and applies
rule 2 to numbers that start with 550, 552, 553, 554, 555, 556, 557, 558 and 559. However if
you enter 55 in entry 1 and 551 in entry 2, the VoIP gateway applies rule 1 to all numbers
that start with 55 including numbers that start with 551.
50
Description
Select the Number Type assigned to this entry.
If you selected Unknown as the Number Plan, you can select Unknown
[0].
If you selected Private as the Number Plan, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PSTN Specific [3] or Level 0
Regional (Local) [4].
If you selected E.164 Public as the Number Plan, you can select Unknown
[0], International [1], National [2], Network Specific [3], Subscriber [4] or
Abbreviated [6].
The default is Unknown.
Select 'Allowed' to send Caller ID information when a call is made using
these destination / source prefixes.
Select 'Restricted' if you want to restrict Caller ID information for these
prefixes.
3Com VCX V7122 SIP VoIP Gateway User Manual

Advertisement

Table of Contents
loading

Table of Contents