3Com VCX V7122 User Manual page 74

To configure the date and time of the VCX V7122, follow these steps:
1 Open the 'Regional Settings' screen (Advanced Configuration menu > Regional
Settings); the 'Regional Settings' screen is displayed.
Figure 35
Regional Settings Screen
2 Enter the time and date where the gateway is installed.
3
Click the Set Date & Time button; the date and time are automatically updated.
Note that after performing a hardware reset, the date and time are returned to their defaults
and should be updated.
To load a configuration file to the VoIP gateway, follow these steps:
1
Open the 'Regional Settings' screen (Advanced Configuration menu > Regional
Settings); the 'Regional Settings' screen is displayed (see
2
Click the Browse button adjacent to the file you want to load.
3
Navigate to the folder that contains the file you want to load.
4
Click the file and click the Open button; the name and path of the file appear in the field
beside the Browse button.
5 Click the Send File button that is next to the field that contains the name of the file you
want to load. An exclamation mark in the screen section indicates that the file's loading
doesn't take effect on-the-fly (e.g., CPT file).
6 Repeat steps 2 to 5 for each file you want to load.
Saving a configuration file to flash memory may disrupt traffic on the VCX V7122.
To avoid this, disable all traffic on the device before saving to flash memory.
A device reset is required to activate a loaded CPT file.
7
To save the loaded auxiliary files so they are available after a power fail, see
Configuration on page 88.
74
Figure
3Com VCX V7122 SIP VoIP Gateway User Manual
35).
Save