3Com VCX V7122 User Manual page 99

Voip sip gateway
Hide thumbs Also See for VCX V7122:
Table of Contents

Advertisement

ini File Field Name
*
Web Parameter Name
RADIUS-Related Parameters
EnableRADIUS
[Enable RADIUS]
AAAIndications
[AAA Indications]
MaxRADIUSSessions
[Max. RADIUS Sessions]
SharedSecret
[Shared Secret]
RADIUSRetransmission
[RADIUS Max.
Retransmissions]
RadiusTO
RADIUSAuthServerIP
[RADIUS Authentication
Server IP Address]
RADIUSAuthPort
[RADIUS Authentication
Port]
RADIUSAccServerIP
[RADIUS Accounting
Server IP Address]
RADIUSAccPort
[RADIUS Accounting Port]
RadiusAccountingType
[RADIUS Accounting
Type]
BootP and TFTP Parameters
IniFileURL
3Com VCX V7122 SIP VoIP Gateway User Manual
Valid Range and Description
0 = RADIUS application is disabled (default).
1 = RADIUS application is enabled.
0 = No indications (default).
3 = Accounting only.
Number of concurrent calls that can communicate with the RADIUS server
(optional).
The valid range is 0 to 240.
The default value is 240.
"Secret" used to authenticate the gateway to the RADIUS server. It should
be a cryptographically strong password.
Number of retransmission retries.
The valid range is 1 to 10.
The default value is 3.
The interval between each retry (measured in seconds).
The valid range is 1 to 30.
The default value is 10.
IP address of Authentication and Authorization server.
Port number of Authentication and Authorization server.
The default value is 1645.
IP address of accounting server.
Port number of Radius accounting server.
The default value is 1646.
Determines when a RADIUS accounting report is issued.
0 = At the Release of the call only (default).
1 = At the Connect and Release of the call.
2 = At the Setup and Release of the call.
Specifies the name of the ini file and the location of the TFTP server from
which the gateway loads the ini and configuration files.
For example:
tftp://192.168.0.1/filename
tftp://192.10.77.13/config<MAC>
Note: The optional string "<MAC>" is replaced with the gateway's MAC
address.
Therefore, the gateway requests an ini file name that contains its MAC
address. This option enables loading different configurations for specific
gateways.
99

Advertisement

Table of Contents
loading

Table of Contents