3Com VCX V7122 User Manual page 113

IPProfile_ID
[IP Profile Settings]
TelProfile_ID
[Tel Profile Settings]
3Com VCX V7122 SIP VoIP Gateway User Manual
IPProfile_<Profile ID> =
<Profile Name>,<Preference>,<Coder Group ID>,
<IsFaxUsed *>,<DJBufMinDelay *>, <DJBufOptFactor *>,
<IPDiffServ *>,<ControlIPDiffServ *>,<EnableSilenceCompression>,
<RTPRedundancyDepth>
Preference = (1-10) The preference option is used to determine the priority of
the Profile. If both IP and Tel profiles apply to the same call, the coders and
other common parameters of the preferred Profile are applied to that call. If the
Preference of the Tel and IP Profiles is identical, the Tel Profile parameters are
applied.
For example:
IPProfile_1 = name1,2,1,0,10,13,15,44,1,1
IPProfile_2 = name2,$$,$$,$$,$,$$,$$,$$,$$,1
$$ = Not configured, the default value of the parameter is used.
(*) = Common parameter used in both IP and Tel profiles.
Note 1: The IP ProfileID can be used in the Tel2IP and IP2Tel routing tables
(Prefix and PSTNPrefix parameters).
Note 2: 'Profile Name' assigned to a ProfileID, enabling User's to
intuitively and easily.
Note 3: This parameter can appear up to 4 times.
TelProfile_<Profile ID> =
<Profile Name>,<Preference>,<Coder Group ID>,
<IsFaxUsed *>,<DJBufMinDelay *>, <DJBufOptFactor *>,
<IPDiffServ *>,<ControlIPDiffServ*>,<DtmfVolume>,<InputGain>,
<VoiceVolume>, <EnableDigitDelivery>, <ECE>
Preference = (1-10) The preference option is used to determine the priority of
the Profile. If both IP and Tel profiles apply to the same call, the coders and
other common parameters of the preferred Profile are applied to that call. If the
Preference of the Tel and IP Profiles is identical, the Tel Profile parameters are
applied.
For examples:
TelProfile_1 = FaxProfile,1,2,0,10,5,22,33,2,22,34,1,1
TelProfile_2 = ModemProfile,0,10,13,$$,$$,$$,$$,$$,0,$$,0,1
$$ = Not configured, the default value of the parameter is used.
(*) = Common parameter used in both IP and Tel profiles.
Note 1: The Tel ProfileID can be used in the Trunk Group table (TrunkGroup_x
parameter).
Note 2: 'Profile Name' assigned to a ProfileID, enabling User's to
intuitively and easily.
Note 3: This parameter can appear up to 4 times.
identify it
identify it
113