Creating A Loadable Prerecorded Tones File - 3Com VCX V7122 User Manual

Figure 78 Encode/Decode ini File(s) Screen
3 Click the Select File... button under the 'Encode ini File(s)' section.
4
Navigate to the folder that contains the ini file you want to encode.
5
Click the ini file and click the Open button; the name and path of both the ini file and the
output encoded file appear in the fields under the Select File button. Note that the name
and extension of the output file can be modified.
6 Click the Encode File(s) button; an encoded ini file with the name and extension you
specified is created.
To decode an encoded ini file, follow these steps:
1 Click the Select File... button under the 'Decode ini File(s)' section.
2
Navigate to the folder that contains the file you want to decode.
3
Click the file and click the Open button. the name and path of both the encode ini file and
the output decoded file appear in the fields under the Select File button. Note that the
name of the output file can be modified.
4 Click the Decode File(s) button; a decoded ini file with the name you specified is
created.
Note that the decoding process verifies the input file for validity. Any change made to the
encoded file causes an error and the decoding process is aborted.

Creating a Loadable Prerecorded Tones File

For detailed information on the PRT file, see
To create a loadable PRT dat file from your raw data files, follow these steps:
224
Prerecorded Tones (PRT) File
3Com VCX V7122 SIP VoIP Gateway User Manual
on page 141.