Replacing The Main Corporate Logo With An Image File - 3Com VCX V7122 User Manual

Replacing the Main Corporate Logo with an Image File

Use a gif, jpg or jpeg file for the logo image. It is important that the image file has a
fixed height of 59 pixels (the width can be configured). The combined size of the
image files (logo and background) is limited to 64 kbytes.
To replace the default logo with your own corporate image via the Web Interface, follow
these steps:
1 Access the VCX V7122 Embedded Web Server (see
Server on page 42).
2 In the URL field, append the suffix 'AdminPage' (note that it's case-sensitive) to the IP
address, e.g., http://10.1.229.17/AdminPage.
3
Click Image Load to Device; the Image Download screen is displayed (see
Figure 72 Image Download Screen
4 Click the Browse button in the Send Logo Image File from your computer to the
Device box. Navigate to the folder that contains the logo image file you want to load.
5
Click the Send File button; the file is sent to the device. When loading is complete, the
screen is automatically refreshed and the new logo image is displayed.
6
Note the appearance of the logo. If you want to modify the width of the logo (the default
width is 339 pixels), in the Logo Width field, enter the new width (in pixels) and press
the Set Logo Width button.
7
To save the image to flash memory so it is available after a power fail see
Configuration on page 88.
The new logo appears on all Web Interface screens.
If you encounter any problem during the loading of the files, or you want to restore
the default images, click the Restore Default Images button.
214
Accessing the Embedded Web
3Com VCX V7122 SIP VoIP Gateway User Manual
Figure 72).
Save