Quickly Viewing Endpoint Test Status; Figure 72: Endpoint Activity Icon Legend - Extreme Networks Sentriant AG Software User's Manual
Hide thumbs
Also See for Sentriant AG:
- Installation manual (80 pages) ,
- User manual (422 pages) ,
- Software user's manual (526 pages)
Table of Contents
Advertisement
Endpoint Activity
For a description of all of these icons, hover the mouse pointer over the legend icon in the upper right-
hand corner of the screen as shown in this figure.
Figure 72: Endpoint Activity Icon Legend
Quickly Viewing Endpoint Test Status
The following list describes the high-level endpoint test statuses:
Failed—Sentriant AG shows this status after the endpoint has failed testing. Click on the plus (+)
●
symbol to show the test failed categories.
Passed—Sentriant AG shows this status after the endpoint has passed the test and is connected to
●
the network.
Never tested—Sentriant AG shows this status when an endpoint cannot be tested or testing is not
●
required, for example, because the endpoint has an unsupported operating system or Compliance-
test endpoints for the endpoint's assigned NAC policy is set to no.
Error testing - An error occurred while attempting to test an endpoint. This status will appear in the
●
primary filtering area only if errors occurred with one or more endpoints.
For a detailed list of conditions that can affect endpoint testing, see
page
369.
146
"Endpoint Testing Conditions" on
Sentriant AG Software Users Guide, Version 5.3
Advertisement
Table of Contents
