End-user Access
c Click the double arrow icon to the left of the policies to move it to the top. The following window
shows the double arrow icon:
Figure 88: Double Arrow Icon
8 Close the Group Policy Management window.
This Agentless Group Policy Object is applicable to all Windows endpoints used in the domain.
Ports Used for Testing
You might need to configure some firewalls and routers to allow Sentriant AG to access the following
ports for agentless testing:
137
●
138
●
139
●
445
●
NOTE
See
"Ports used in Sentriant AG" on page 425
Allowing the Windows RPC Service through the Firewall
If end-users enable the XP SP2 Professional firewall, they need to change the configuration to allow the
agentless testing.
NOTE
These firewall configuration methods can be configured using the Windows Group policy and pushed out to all users
of a Windows domain.
To configure the Windows XP Professional firewall to allow the RPC service to connect:
Windows endpoint>>Start>>Settings>>Control Panel>>Windows Firewall>>Exceptions tab
168
double arrow icon
for a complete description of the ports used in Sentriant AG.
Sentriant AG Software Users Guide, Version 5.3