Extreme Networks Sentriant AG Software User's Manual page 332

System Administration
Figure 180: checkOpenPorts.py script (continued)
#
# These are the arguments to run the test. This is displayed in the
command
# line help.
#
testArguments = \
"""
--host=<hostname, IP, or NETBIOS>
--input ports_not_allowed=<comma delimited list of ports>
Example: <this script> --host=somehost --input
"ports_not_allowed=23,80"
"""
#
# All tests must define the runTest method with the self and the debug
# parameters.
#
def runTest(self,debug=0):
#
# All tests must call the initialize routine
#
self.initTest()
if debug:
session="+self.session.id()+")"
#
# Create a hash to store the return results.
# All tests must fill return a hash with the following keys:
#
#
successful
#
#
#
returnHash = {}
returnHash["status_code"] = 1
returnHash["result_code"] = "pass"
returnHash["result_message"] = "The ports were not open."
try:
332
print "Starting checkOpenPorts(host="+self.session.host()+",
status_code - 0 if an unexpected error occurred, 1 if
result_code - pass, fail or some error
result_message - the message to display to the end-user
ports = []
if self.inputParams.has_key("ports_not_allowed"):
ports = self.inputParams["ports_not_allowed"].split(",")
else:
# No ports not allowed, pass
return(self.doReturn(returnHash))
Sentriant AG Software Users Guide, Version 5.3