7 Log in to the UI of the standby MS again (at this point, all UI users from the primary should be able
to log in).
8 Navigate to System configuration>>Management server>>edit network settings
9 Change the IP address to be that of the old or primary MS. See
on page
58.
10 Navigate to System configuration>>Enforcement clusters and servers
11 Ensure that communication has been restored to all ESs. See
12 Navigate to System configuration>>Management server>>edit network settings.
13 Change the IP address back to the standby MS IP (so that if and when the primary MS comes back
up, its IP address will not cause a conflict) See
Sentriant AG Software Users Guide, Version 5.3
"Modifying MS Network Settings"
"Viewing ES Status" on page
"Modifying MS Network Settings" on page 58
MS Disaster Recovery
54.
433