Figure 71: Access Control Status Rollover - Extreme Networks Sentriant AG Software User's Manual

NOTE
If an endpoint is seen by two different clusters simultaneously, the endpoint access control status can get lost. This
situation could occur, for example, if you had a Training cluster and an Engineering cluster and an endpoint that
was connected in the Engineering cluster also attempted to connect by way of the Training cluster. An error would
occur in this case. Make efforts when you are configuring your clusters to avoid allowing this condition.
To view information about an endpoint's access control status, hover the mouse pointer over the
endpoint's icon in the access control status (ac) column as shown in the following figure.

Figure 71: Access Control Status Rollover

NOTE
If you don't see the access control status information you are looking for, click on the endpoint's NetBIOS name to
"Viewing Detailed Endpoint Information" on page 147
get more information. See
Sentriant AG Software Users Guide, Version 5.3
Endpoint Activity
for details.
145