Resetting Your System - Extreme Networks Sentriant AG Software User's Manual
Hide thumbs
Also See for Sentriant AG:
- Installation manual (80 pages) ,
- User manual (422 pages) ,
- Software user's manual (526 pages)
Table of Contents
Advertisement
<ip address> is the new IP address for the MS or ES. For example, 192.168.40.10
<netmask> is the netmask. For example, 255.255.255.0
<gateway> is the gateway. For example, 10.1.1.1
Resetting your System
There are times when you may wish to revert to the as-shipped state for your system; reverting the
configuration and database to that of a freshly installed system.
NOTE
You must reset the system before you can change the personality of the server; that is, before you can change an
MS to and ES or an ES to a MS.
To reset your system to the as-shipped state:
Command line window
1 Log in as
to the Sentriant AG MS or ES, either using SSH or directly with a keyboard.
root
2 Enter the following command at the command line:
resetSystem.py [both | ms | es]
Where:
No arguments—The system is reset to the same type (either a single-server installation with the MS
and ES on the same server, an MS, or an ES), the database is cleared, and the property files are
restored to their defaults
—The system is reset to be a single-server installation (MS and ES on one server), the database
both
is cleared, and the property files are restored to their defaults
—The system is reset to be an MS, the database is cleared, and the property files are restored to
ms
their defaults
—The system is reset to be an ES, the database is cleared, and the property files are restored to
es
their defaults.
NOTE
The resetSystem.py file is in the following directory:
cd /usr/local/nac/bin
Sentriant AG Software Users Guide, Version 5.3
System Administration
313
Advertisement
Table of Contents
