System Configuration
Setting Sentriant AG Properties
Most Sentriant AG properties are set by default. To change or set properties, you must change the
properties as described in
You must set the following properties for <product name variable> to communicate with your external
post-connect server (see
Compliance.ActiveMQJMSProvider.url=ssl\://0.0.0.0\:61616
●
Compliance.JMSProvider.UserName=<username>
●
Compliance.JMSProvider.Password=<password>
●
Where:
<username> is the user name you use to log in to the external post-connect server.
<password> is the password you use to log in to the external post-connect server.
Configuring a Post-connect System
To configure an external post-connect system:
Home>>System configuration>>Post-connect
114
"Changing Properties" on page
"Configuring the Post-connect Server" on page
315.
381):
Sentriant AG Software Users Guide, Version 5.3