Extreme Networks Sentriant AG Software User's Manual page 427

Table 21: Ports in Sentriant AG (continued)
Port Parties
Ports used for NTP:
123 (UDP) MS to NTP
server
123 (UDP) ES to MS
Ports used for proxy servers:
Varies MS to proxy
server
Ports used for LDAP:
Varies ES to LDAP
server
Ports used for re-authentication:
22 (TCP) ES to switch
23 (TCP)
161 (TCP)
1812 (TCP) Switch to ES
Sentriant AG Software Users Guide, Version 5.3
Description
Destination port 123 for NTP.
NTP communication between the ES and
MS occurs on destination port 123.
The port used for connecting to the
proxy server.
When using 802.1X mode with local
RADIUS, connecting to Active Directory,
the LDAP server IP address and optional
port number.
Used when you select the test
connection to device button, and when
an endpoint is re-authenticated by the
switch. (SSH)
Sentriant AG user interface:
System configuration
>>Quarantining
>>802.1X Quarantine method
>>Add 802.1X device
>>Select any device type
>>Select the SSH Connection method
Used to relay credentials to RADIUS
when you are using the local RADIUS
server.
Ports used in Sentriant AG
Comments
Not configurable
Not configurable
Configure in the Sentriant AG
user interface:
System configuration
>>Management server option
>>Proxy server area
>>Proxy server port text field
Example: 8080
Configure in the Sentriant AG
user interface:
System configuration
>>Quarantining
>>802.1X Quarantine
method
>>OpenLDAP End-user
authentication method
>>Server text field
Example: 10.0.1.2:636
Not configurable
Not configurable
427