Setting Up A Post-Connect Host; Windows - Extreme Networks Sentriant AG Software User's Manual
Hide thumbs
Also See for Sentriant AG:
- Installation manual (80 pages) ,
- User manual (422 pages) ,
- Software user's manual (526 pages)
Table of Contents
Advertisement
log4j-1.2.13.jar
log4j.properties
wrapper.dll
wrapper.jar
■
log
Setting up a Post-connect Host
Windows
Your post-connect host can be a Linux or Windows server. This section provides instructions on setting
up a Windows host.
To set up a Windows post-connect host:
1 Install WinPcap on a Windows machine if it is not already installed:
a Log into your Windows server.
b Install WinPcap (a packet capturing and filtering system):
1) Navigate to http://www.winpcap.org/.
2) Download and install the WinPcap auto-installer (driver+DLLs) image.
2 Install Java on a Windows machine if it is not already installed:
a Log into your Windows server.
b Install Java:
1) Navigate to http://java.sun.com/javase/downloads/index.jsp.
2) Download and install the Java 1.5 update 10 or greater.
3 Install Python 2.5 or later if it is not already installed:
a Log into your Windows machine.
b Install Python:
1) Navigate to http://www.python.org/download/.
2) Download and install the Python for Windows version.
4 Copy the
file to the Windows server:
cacerts
a Log in the Sentriant AG MS as
Sentriant AG Software Users Guide, Version 5.3
using SSH or directly with a keyboard.
root
Configuring the Post-connect Server
383
Advertisement
Table of Contents
