Selecting The Time Zone; Enabling Snmp - Extreme Networks Sentriant AG Software User's Manual

5 Click ok.
CAUTION
Manually changing the date/time (other than a time zone change) a large amount will require a restart of all servers.
Rolling back the clock will have adverse effects on the system.

Selecting the Time Zone

To set the time zone:
Home window>>System configuration>>Management server
1 Select the following:
a Select a region from the Region drop-down list in the Date and time area.
b Select a time zone from the Time zone drop-down list.
2 Click ok.

Enabling SNMP

To select SNMP settings:
Home window>>System configuration>>Management server>>SNMP settings
1 Select the Enable SNMP check box to select the SNMP settings.
a Enter the SNMP read community string.
b Enter the SNMP allowed source network. The value must be either "default" or a network
specified in CIDR notation.
2 Select the Outgoing SNMP notifications check box.
3 Enter a comma-separated list of IP address or hostnames that can receive the SNMP notifications.
4 Enter the community string used to authorize SNMP notifications from Sentriant AG.
5 Select one or both of the following:
a Select the Resend notifications check box and enter the resend interval, for example 60.
NOTE
NAC policy tests can be configured such that if an endpoint fails the test, it will be granted network access
temporarily. In these cases, it might be desirable not to send an SNMP notification.
Sentriant AG Software Users Guide, Version 5.3
System Configuration
61