Figure 11: Add Enforcement Cluster - Extreme Networks Sentriant AG Software User's Manual

System Configuration
1 Click Add an Enforcement cluster in the Enforcement clusters & servers area. The Add
Enforcement cluster window appears. The General area is displayed by default.

Figure 11: Add Enforcement Cluster

a Enter a name for the Enforcement cluster in the Cluster name field.
b Select a NAC policy group from the NAC policy group drop-down list (see
page 201).
2 Click Quarantining in the Add Enforcement cluster window. Complete the steps described in
"Quarantining, General" on page
NOTE
You can also access the quarantine area Enforcement cluster by clicking Quarantining in the System configuration
window (see "Quarantining, General" on page 77
3 The following cluster settings take on default values set from the System configuration window. To
set up operating parameters that differ from those default settings, select the menu item of the
settings you want to change, then select the For this cluster, override the default settings check box,
and make the desired changes. Refer to the sections listed below to set up the default values, or for
more information on the specific settings.
46
77.
for more information).
"NAC Policies" on
Sentriant AG Software Users Guide, Version 5.3