Modifying Ms Network Settings; Figure 19: Management Server Network Settings - Extreme Networks Sentriant AG Software User's Manual
Hide thumbs
Also See for Sentriant AG:
- Installation manual (80 pages) ,
- User manual (422 pages) ,
- Software user's manual (526 pages)
Table of Contents
Advertisement
System Configuration
Modifying MS Network Settings
CAUTION
Back up your system immediately after changing the MS or ES IP address. If you do not back up with the new IP
address, and later restore your system, it will restore the previous IP address which can show an ES error condition
and cause authentication problems. See
your system.
To modify MS network settings:
Home window>>System configuration>>Management server
WARNING!
Changing the MS network settings will cause the network interface to restart.
1 Click edit network settings in the Network settings area.
Figure 19: Management Server Network Settings
2 Enter the values you want to modify:
Enter a new name in the Host name text field. For example,
■
NOTE
Select names that are short, easy to remember, have no spaces or underscores, and the first and last character
cannot be a dash (-).
Enter a new address in the IP address text field. For example,
■
Enter a new netmask in the Network mask text field. For example,
■
Enter a new gateway in the Gateway IP address text field. For example
■
58
"Maintenance" on page 118
for instructions on backing up and restoring
garp.mycompany.com
192.168.153.35
255.255.255.0
192.168.153.2
Sentriant AG Software Users Guide, Version 5.3
Advertisement
Table of Contents
