The following figure shows the Reports window.
Figure 162: Reports
1 In the Report drop-down list, select the report to run.
2 Select the Report period.
3 Select the Rows per page.
4 In the Endpoint search criteria area, select any of the following options to use for filtering the
report:
a Cluster
b Endpoint NetBIOS
c Endpoint IP address
d Endpoint MAC address
e Endpoint test status
f
Access control status
g Endpoints must match:
1) All of the selected criteria
2) Any of the selected criteria
Sentriant AG Software Users Guide, Version 5.3
Reports
289