Enter a new ES in the Host name text field. For example,
●
Enter a new ES address in the IP address text field. For example,
●
Enter a new netmask in the Network mask text field. For example,
●
Enter a new gateway in the Gateway IP address text field. For example
●
Enter one or more DNS resolver IP addresses, separated by commas, semicolons, or spaces in the
●
DNS IP addresses text box. For example:
NOTE
The Sentriant AG ESs host name must be a fully qualified domain name (FQDN). For example, the FQDN should
include the host and the domain name—including the top-level domain.
For example, waldo.mycompany.com. Select names that are short, easy to remember, have no spaces or underscores,
and the first and last character cannot be a dash (-).
NOTE
You cannot change the ES IP address for a single-server installation. You can change the MS IP address for a single-
server installation.
Changing the ES Date and Time
To change the ES date and time:
Home window>>System configuration>>Enforcement clusters & servers>>Select an ES>>Configuration
1 Select a Region from the Region drop-down list in the Date and time area.
2 Select a time zone from the Time zone drop-down list.
3 Click ok.
NOTE
See
"Selecting the Time Zone" on page 61
WARNING!
Manually changing the date/time by a large amount (other than a time zone change) will require a restart of all
servers. Rolling back the clock will have adverse effects on the system.
Modifying the ES SNMP Settings
To change the ES SNMP settings:
Home window>>System configuration>>Enforcement clusters & servers>>Select an ES>>Configuration
Sentriant AG Software Users Guide, Version 5.3
garp.mycompany.com
10.0.16.100,10.0.1.1
for information on changing the time zone settings for the MS.
System Configuration
192.168.153.35
255.255.255.0
192.168.153.2
53