16
System Administration
Launching Sentriant AG
Launching and Logging into Sentriant AG
To launch and log into Sentriant AG:
Browser window on the workstation
1 Using
, point your browser to the Sentriant AG MS IP address or host name. The login
https://
page appears.
2 Enter the User name and Password that you defined the first time you logged in.
3 Click log in. The Sentriant AG Home window appears.
Logging out of Sentriant AG
To log out of Sentriant AG:
Any Sentriant AG window
Click Logout in the upper right corner of the Sentriant AG home window. When the logout procedure
completes, the Extreme Networks, Inc. login window appears.
Important Browser Settings
There are several browser configuration settings to make, depending on which browser you are using.
Please see "Important browser settings" in the Installation Guide for details.
Restarting Sentriant AG System Processes
This section lists the commands to stop and restart services associated with Sentriant AG installations
for MS, ES, or Single-server Installations. Restart instead of start is used for services already running in
Sentriant AG.When running Sentriant AG and monitoring systems on your network, you may
encounter a warning on a server stating that a Connection cannot be established. Recommend restart.
The following table provides specific commands for stopping and restarting your services with
Sentriant AG.
If stopping and restarting your system is not successful or you are being required to restart more than
once, contact Technical Assistance Center (TAC) at: support@extremenetworks.com,
Sentriant AG Software Users Guide, Version 5.3
307