Configuring Windows Vista For Agentless Testing; Figure 77: Local Area Connection Properties - Extreme Networks Sentriant AG Software User's Manual

3 Select Properties. The Local area connection properties window appears:

Figure 77: Local Area Connection Properties

4 On the General tab, in the This connection uses the following area, verify that File and Printer
sharing is listed and that the check box is selected.
5 Click OK.
For more information on file and printer sharing, refer to the following:
To configure File and Printer Sharing for Microsoft
●
documentation/windows/xp/all/proddocs/en-us/howto_config_fileandprintsharing.mspx
To add a network component—http://www.microsoft.com/resources/documentation/windows/xp/all/
●
proddocs/en-us/howto_config_fileandprintsharing.mspx
NOTE
Due to changes by Microsoft in Windows XP SP3 remote login sessions, SP3 endpoints cannot be tested agentlessly
while the user is logged off.

Configuring Windows Vista for Agentless Testing

Agentless testing for Windows Vista Endpoints requires that these endpoints be configured from a
domain controller. The following steps assume that:
A Windows domain on your network has Windows 2003 Server R2 (SP2) domain controller installed
●
A Group Policy Management console is installed on your network
●
Details on setting up the domain controller can be found at:
http://www.microsoft.com/technet/prodtechnol/windowsserver2003/technologies/directory/activedirectory/
stepbystep/domcntrl.mspx
Sentriant AG Software Users Guide, Version 5.3
Networks—http://www.microsoft.com/resources/
End-user Access
159