a Select the Method to execute the re-authentication command in test:
802.1X
●
MAC auth
●
b Enter the port of the endpoint being tested in the Port text field.
c Enter the MAC address of the endpoint being tested in the MAC address text field.
3 For Cisco CATOS, Cisco IOS, Enterasys, Extreme, Foundry switches
include the re-authentication command as part of the test, select the Re-authenticate an endpoint
during test check box and:
a Enter the port of the endpoint being tested in the Port text field.
b Enter the MAC address of the endpoint being tested in the MAC address text field.
NOTE
You must enter the port, the MAC address, or both, depending on the re-authentication OID.
4 Click test connection to this device.
Cisco IOS
To add a Cisco IOS device:
Home window>>System configuration>>Quarantining>>802.1X Quarantine method radio button>>Add
an 802.1X device
Sentriant AG Software Users Guide, Version 5.3
System Configuration
(Figure
37) if you want to
87