Extreme Networks Sentriant AG Software User's Manual page 285

1 In the Quarantine method area, select the 802.1X radio button.
2 In the Basic 802.1X settings area, select the remote Endpoint detection location radio button.
3 Click ok.
Command line window
NOTE
Perform the following steps on each ES in your system.
4 Log in as to the Sentriant AG ES using SSH or directly with a keyboard.
root
5 Enter the following command:
egrep DeviceActivityCapture /usr/local/nac/properties/nac-es.properties
The expected results are:
Compliance.DeviceActivityCapture.RunningRemotely=true
It can take a minute or two Contact Technical Assistance Center (TAC)
(support@extremenetworks.com) if your results are different.
NOTE
It can take a minute or two after changing the property in the user interface for the change to propagate to all ESs.
6 Edit the configuration file:
a Open the following file with a text editor such as
/etc/syslog-ng/syslog-ng.conf
b In the
### SOURCE ENTRIES HERE ###
source rdac
c In the
### DESTINATION ENTRIES HERE ###
destination d_dac { program("/usr/local/nac/bin/syslog-to-dac.py"); };
d In the
### LOG ENTRIES HERE ###
log { source(rdac); filter(f_mesg); destination(d_dac); };
Sentriant AG Software Users Guide, Version 5.3
area, add the following line:
{ tcp(); };
area, add the following line:
Remote Device Activity Capture
:
vi
area, add the following line:
285