Figure 38: Add Cisco Ios Device - Extreme Networks Sentriant AG Software User's Manual

System Configuration

Figure 38: Add Cisco IOS Device

1 Enter the IP address of the Cisco IOS device in the IP address text field.
2 Enter a shared secret in the Shared secret text field. The shared secret is used to encrypt and sign
packets between the device and RADIUS server.
3 Re-enter the shared secret in the Re-enter shared secret text field.
4 Enter an alias for this device that appears in log files in the Short name text field.
5 Select Cisco IOS from the Device type drop-down list.
6 Select telnet or SSH from the Connection method drop-down list.
7 Enter the User name with which to log into the device's console.
8 Enter the Password with which to log into the device's console.
9 Re-enter the console password.
10 Enter the Cisco port mask in the text field. This specifies which characters within the endpoint
identifier returned by the Cisco device contain the bank and port information of the endpoint. All
offsets start at 0, so a mask of 2/34 indicates character 3 for the bank and characters 4 and 5 for the
port. If the Cisco device were to return 50210 for an endpoint, a port mask of 2/34 would indicate
that the endpoint is on bank 2 and port 10 (2/10), where 210 are the third, fourth and fifth bytes in
the identifier.
88
Sentriant AG Software Users Guide, Version 5.3