Figure 44: Add Hp Procurve Device - Extreme Networks Sentriant AG Software User's Manual

System Configuration

Figure 44: Add HP ProCurve Device

1 Enter the IP address of the HP ProCurve device in the IP address text field.
2 Enter a shared secret in the Shared secret text field. The shared secret is used to encrypt and sign
packets between the device and RADIUS server.
3 Re-enter the shared secret in the Re-enter shared secret text field.
4 Enter an alias for this device that appears in log files in the Short name text field.
5 Select ProCurve Switch from the Device type drop-down list.
6 Select whether to connect to this device using telnet, SSH, or SNMPv2 in the Connection method
drop-down list.
7 SSH settings:
a Enter the User name used to log into this device's console.
b Enter the Password used to log into this device's console.
c To help confirm accuracy, type the same password you entered into the Password field in the Re-
enter Password field.
d Enter the Enable mode user name that is used to enter enable mode on this device.
98
Sentriant AG Software Users Guide, Version 5.3