Resetting Your Test Data - Extreme Networks Sentriant AG Software User's Manual

System Administration

Resetting your Test Data

There are times when you may wish to revert to the as-shipped state for test data; clearing the database
of all endpoints and test results, and resetting SAPQ and DHCP leases.
To reset your test data to the as-shipped state:
Command line window
1 For single-server installations:
a Log in as root to the Sentriant AG MS, either using SSH or directly with a keyboard.
b Run the script by entering the following at the command line:
resetTestData
2 For multiple-server installations:
a Stop the
1) Log in as
2) Enter the following at the command line:
service nac-es stop
b Stop the
1) Log in as
2) Enter the following at the command line:
service nac-ms stop
c Run the script on each ES:
1) Log in as
2) Enter the following at the command line:
resetTestData
d Run the script on the MS:
1) Log in as
2) Enter the following at the command line:
314
service on all ESs:
nac-es
to each Sentriant AG ES, either using SSH or directly with a keyboard.
root
service on the MS:
nac-ms
to the Sentriant AG MS, either using SSH or directly with a keyboard.
root
to each Sentriant AG ES, either using SSH or directly with a keyboard.
root
to each Sentriant AG MS, either using SSH or directly with a keyboard.
root
Sentriant AG Software Users Guide, Version 5.3