Extreme Networks Sentriant AG Software User's Manual page 196

End-user Access
Table 7: Default Test Names and Descriptions (continued)
Test name
checkAutoUpdateStatus.String.5
checkAutoUpdateStatus.String.6
checkHotFixes.String.1
checkHotFixes.String.2
checkHotFixes.String.3
checkHotFixes.String.4
checkHotFixes.String.5
checkHotFixes.String.6
checkIESecurityZoneSettings.String.1
checkIESecurityZoneSettings.String.2
checkIESecurityZoneSettings.String.3
checkIESecurityZoneSettings.String.4
checkIESecurityZoneSettings.String.5
checkIESecurityZoneSettings.String.6
checkIESecurityZoneSettings.String.7
checkIEVersion.String.1
196
Description
Automatic Updates must be configured to %s. For
Windows 2000, install Service Pack 4, then enable
Automatic Updates by selecting: Control
Panel>>Automatic Updates. For Windows XP:
select Control Panel>>System>>Automatic Updates
tab.,
The Automatic Update client has been disabled.
Ask your local System Administrator for instructions
on how to enable it.,
An unsupported operating system was
encountered.,
The OS is not relevant to this test.,
The service pack level is not relevant to this test.,
The %s installed are not current. Run Windows
Update to install the most recent service packs and
hotfixes. The missing hotfixes are: %s. You may
need to run Windows Update multiple times to
install all the hotfixes. Some of the hotfixes listed
may be contained in a cumulative patch.,
All required %s are installed.,
There are no %s installed. Run Windows Update to
install the most recent service packs and hotfixes.
You may need to run Windows Update multiple
times to install all the hotfixes.,
There was no security zone specified.,
Internet Explorer %s security zone settings are
acceptable.,
There was no security level specified.,
An invalid security level '%s' was specified.,
Could not test Internet Explorer %s security zone
settings. On Windows 2000 you must be logged in
as the same user that is currently being tested.,
The required security level for your Internet
Explorer %s security zone is %s or greater. To
change the setting, select Tools>>Internet
Options>>Security>>%s>> select the setting and
click OK. If you are using a custom setting, higher
security settings are required for:<ul>%s</ul>*
indicates an Internet Explorer 6 or later setting,
There were no Internet Explorer %s security zone
settings found.,
Unable to retrieve IE version.,
Sentriant AG Software Users Guide, Version 5.3