Naming Your Enforcement Cluster; Changing The Ms Host Name; Changing The Es Host Name; Changing The Ms Or Es Ip Address - Extreme Networks Sentriant AG Software User's Manual

System Administration
1 Select one of the following from the Access mode area:
normal—Access is regulated by the NAC policies
■
allow all—All requests for access are granted, but endpoints are still tested
■
2 Click ok.

Naming Your Enforcement Cluster

To name your Enforcement cluster:
Home window>>System configuration>>Enforcement clusters & servers>>Select an Enforcement
cluster
1 In the Cluster name text field, enter a name. Choose a name that describes the cluster, such as a
geographic location (like a street or city name), a building, or your company name.
2 Click ok.

Changing the MS Host Name

To change the MS host name:
See "Modifying MS Network Settings" on page

Changing the ES Host Name

To change the ES host name:
See "Changing the ES Network Settings" on page

Changing the MS or ES IP Address

To change the MS or ES IP address:
The preferred method is to use the user interface:
"Modifying MS Network Settings" on page 58
●
"Changing the ES Network Settings" on page 52
●
However, if you cannot access the user interface, use the following instructions:
1 Log in to the MS or ES as root using SSH or directly with a keyboard.
2 Enter the following command at the command line:
network-settings.py
Where:
312
58.
52.
<ip address> <netmask> <gateway>
Sentriant AG Software Users Guide, Version 5.3